How to use and set up fingerprint recognition to unlock the Galaxy S22 Series

After the device detects your finger, lift it up and place it on the fingerprint recognition sensor again. Repeat this action until the fingerprint is registered successfully.

For better fingerprint recognition
When you scan your fingerprints on the device, be aware of the following conditions that may affect the performance of this feature:

• The device may not recognize fingerprints that are affected by wrinkles or scars.

• The device may not recognize fingerprints from small or thin fingers.

• To improve recognition performance, register the fingerprints of the fingers used most often to perform tasks on the device.

• Your device has a built-in fingerprint recognition sensor at the bottom center of the screen. Ensure that the screen protector or the touchscreen on the fingerprint recognition sensor area is not scratched or damaged by objects, such as coins, keys, pens, and necklaces.

• Ensure that the fingerprint recognition sensor area at the bottom center of the screen and your fingers are clean and dry.

• If you bend your finger or use a fingertip, the device may not recognize your fingerprint. Press the screen so that your fingertip spreads over the wide surface of the fingerprint recognition area.

Unlocking the screen with your fingerprints
You can unlock the screen with your fingerprint instead of using a pattern, PIN, or password.

Step 1. On the Settings screen, tap Biometrics and security > Fingerprints.

Step 2. Unlock the screen using the preset screen lock method.

Step 3. Tap the Fingerprint unlock switch to activate it. On the lock screen, place your finger on the fingerprint recognition sensor and scan your fingerprint.

If you choose biometrics recognition, which includes using Fingerprints or Facial recognition, to unlock your phone, the screen which requests your PIN, Pattern or Password may still appear instead of Fingerprints or Facial recognition in some cases according to the policy of Android OS.

• If you have used and unlocked the device using Biometrics including Fingerprints or Facial recognition in the past 24 hours.

• If 4 hours pass without an additional unlock operation after unlocking your device using Fingerprints or Facial recognition.

• If 72 hours pass after unlocking your device using a PIN, Pattern or Password while fingerprint is set as screen lock type.

This is an intended response for enhanced security of your device. Additionally, you can only use a PIN, Pattern or Password to unlock the screen after restarting the device or when you don’t use the device for more than 24 hours.

To reduce the noise that may temporarily be generated when the screen is turned on or off, there is a 0.3 sec delay, which initializes the related touch module. Therefore, if you try to recognize your fingerprint as soon as you turn the screen on or off, the device may not immediately recognize your fingerprint properly. Try once more and the feature should work.

To avoid unintentional fingerprint recognition, the Fingerprint always on feature should be disabled. If the feature is enabled, your phone will continue to try to scan your fingerprint as long as you hold your phone. This may cause unwanted vibrations or unlocking. If you think this feature is inconvenient to use, follow the steps below to disable the feature.

Step 1. Launch the Settings app and tap Biometrics and security.

Step 2. Tap Fingerprint.

Step 3. Turn off the switch next to Fingerprint always on.