What eARC is and how to set on Samsung Smart TV
eARC enables sending audio to a TV that originates from cable, satellite, streaming or source devices to be sent to an AVR or sound bar through a single HDMI cable. This ensures the simplicity of the connectivity and that the original audio can be experienced.
HDMI ARC and eARC differences
Most TVs compress audio signals in advance before going through HDMI cables. The eARC (Enhanced Audio Return Channel) enables you to transmit the original full resolution audio signal through an HDMI cable and reproduce the best sound without compromise. The eARC is a feature implemented in the latest HDMI 2.1 specification, the biggest advantage is that it exceedingly improves bandwidth and speed. This allows you to transmit high quality audio from your TV to your Soundbar or AV receiver and is compatible with the high bitrate formats Dolby Atmos and DTS
eARC is also popularly referred to as the next-gen ARC. It proves support for larger bandwidth and supports faster speeds. Therefore, you are able to deliver higher quality audio from your HDTV to your sound bar or audio receiver.
|
Audio Format |
ARC |
eARC |
|---|---|---|
|
Dolby Digital |
O |
O |
|
Dolby Digital+ |
O |
O |
|
Dolby TrueHD |
X |
O |
|
Dolby ATMOS |
O (1) |
O |
|
DTS, DTS Master, DTS-X |
X |
X |
|
Multichannel PCM (LPCM) * |
X |
O (2) |
(1) Dolby ATMOS support is only available for ARC Dolby Digital+ based ATMOS.
(2) LPCM is supported from 2021 models (AU7000 or higher).
* Multichannel PCM max 5.1 ch supported.
Supported models for eARC
- TV: UHD TU7000 and above models.
- Soundbar: Q70T and above models.
- Audio format: The latest high bitrate audio formats are supported including Dolby TrueHD, Dolby Atmos, and more.
Notes:
- You must use an eARC supported HDMI cable. (HEAC or HEC).
- Anynet + (HDMI-CEC) function must be enabled on the smart TV.
- If using an unauthorized cable, an error may occur.
Settings for HDMI-eARC Mode
For the devices supporting eARC, you can consider the HDMI eARC Mode. Muting occurs temporarily during device connection.
Follow the steps below to set up the TV's input audio.
Home button on your remote control and then head to Settings
All Settings
Note: Ensure that your TV and external device are connected via the eARC port of the unit. If the connection is not made, make sure the Anynet+ function is enabled on your TV.
Note:
- Default setting for eARC Mode is off. (Connect to ARC automatically)
- eARC is only activated when HDMI-eARC Mode is turned on.
You will need to enable HDMI-CEC protocols in the Settings Menu on your TV. Samsung TVs call the HDMI-CEC protocol Anynet+. Anynet+ allows you to use the TV remote to control external devices and listen to TV sound through a soundbar (receiver) connected via HDMI-ARC or eARC
Home button on your remote control and then head to Settings
All Settings
Note:
- HDMI port will be labeled ARC/eARC on the back of the TV or One Connect Box.
- Most One Connect Boxes have an HDMI-ARC port (it is usually the third HDMI port).
If there is a problem with the ARC/eARC operation, first remove all external devices (STB,OTT devices, etc.) connected to the TV, then try playing again. Some external devices may not properly comply with HDMI connection specifications, which may cause problems.
You need to check the following to connect eARC to a TV.
- Check the eARC port (the same port as ARC) is connected.
- Check the connected AV device is an eARC-enabled device.
- Check the HDMI cable is HEAC or HEC supported.
- Reconnect HDMI cable, and then reset HDMI-eARC Mode to Auto.
If you are having problem with poor sound output even when eARC is connected properly, you need to check the Digital Output Audio Format. To check if the AV device does not support the Audio Output Format, test the output sound by changing Digital Output Audio Format to PCM / Auto / Pass-Through once each.
Home button on your remote control and then head to Settings
All Settings
Note: If you have any questions after verifying the above-mentioned solutions, please call our contact center to get help with your inquiry. Our helpful agents will be there to help you.
Thank you for your feedback!
Please answer all questions.